Monday, 28 August 2017

Posilift Global's Power Manipulator can be used 10 carry all kinds orhcavy machinery parts

Posilift Global's Power Manipulator can be used 10 carry all kinds orhcavy machinery parts

Posilift Global's Power Manipulator can be used 10 carry all kinds orhcavy machinery parts Is. The I)O\\cr manipulator is lik e a mechanical hand that can replace large manpower in cargo handling. with just .......
one person 10 operate the machine with ease. It i~ suitable for mechanical assembly lines or moving of components in the processing line.

And can !lip at any angle for precise positioning of component s. Features: the eq uipment is designed
to suit agh en app location - lilt move. rotate, incline or position~ many gripping styles pneumatic or mechanical grippers, vacuum suction. magnets. hooks. ctc: and many configurations column, overhead fixed . overhead trlley mounted and no of trolley mounted.

The company specialises in sohing handling problem \\ ith solUlions that best meets the need and budget. posilin Global. based in lIong Kong. supplies a wide range of lin assist devices industrial manipulators, articulating arms. cable balancing arms, mobile lifters. pneumatic balancers. intclligl:l1l assist devices. serve hoists. vacuum liners and similar products lO solve repetitivc matcrial handling. lining. moving and positioning problems. The company is a distributor in Asia for Famatee Handling Solutions (Italy): Knight Balancers
and Sen o 1I 0ists (Uni ted Stales): Armtec Liti Assist Devices (Australia/China): and Anvcr Vacuum Liners (U ). COlltoct:


POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au


HANDLING ROLLS OF PACKAGING FILM FROM PALLET TO DELIVERY TROLLEY OR WRAPPING MACHINE


HANDLING ROLLS OF PACKAGING FILM FROM PALLET TO DELIVERY TROLLEY OR WRAPPING MACHINE

PROBLEM: Heavy rolls of plastic film were delivered to the company on pallets in hole “eye to the sky” orientation.  They needed to lift and place the rolls on a delivery trolley in “eye to the wall” orientation.

ISSUES:  The two major issues were 1 . Lifting the rolls off the pallet and onto the delivery trolley  and  2. Turning the roll from “eye to the sky” to “eye to the wall”.

A common practice of using a crowbar to tip the rolls was unsafe for operators and also added the risk of damaging the rolls.  Using a hoist to lift and turn the heavy rolls would be too slow and cumbersome and there is always the danger of swing when using a cable for heavy objects.

SOLUTION:  For this application the Armtec Rigid Articulated Arm manipulator (Armtec RA200) with a mandrel tooling was recommended.  was s (RAcolumn mounted pneumatic manipulator with articulated arm manipulator with mandrel gripping tool and weight pre-selector was used.  .  roll handling manipulator with a gripping mandrel, weight pre-selector.  This manipula was different Using a crowbar to tip the The company had many different and place it on a delivery trolley  orientation company needed to rotate the in the food industry needed to move heavy rolls of plastic film from a pallet to a delivery trolley

GENERAL
For this company, handling from the trolley to the packaging machine was not an issue because the packaging machine was designed to lift from the delivery trolley once the roll was “eye to the wall” orientation.



POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

FOUNDRY AND HEAVY INDUSTRY LIFTING AND POSITIONING SAFETY SOLUTION FOR UNSTABLE LOADS

FOUNDRY AND HEAVY INDUSTRY LIFTING AND POSITIONING
SAFETY SOLUTION FOR UNSTABLE LOADS
550KG SAND CAST MOULDS

PROBLEM:  Sand cast moulds weighing up to 550kg had to be moved and precisely positioned.  The sand casts were fragile and prone to disintegrate when knocked.  They needed care and control in lifting and positioning.  The company had its own tooling to grip the moulds and only needed a lifter with a hook.

ANALYSIS:  This application required an articulated arm in a balanced state to give the precise control for positioning.  It also needed additional safety features in case of total load loss during operation. 
A crane or hoist was not considered suitable because their jerky up and down movements increased the risk of damage to the mould particularly on positioning. 
An air balancer was not suitable for this operation because of the weight and because there was no anti-jumping option strong enough to counter the possible heavy weight loss. 

SOLUTION:  For this operation a Armtec Industrial Manipulator was chosen with the added safety feature of a hydraulic anti-jump device.  The manipulator was mounted on overhead tracking with a pneumatic motorized trolley.  The hook and handle were designed to give the operator the best control of the product using both hands.  All the controls were positioned ergonomically on the handles so they can be used by the operator without having to take his hands off the handles.

The Armtec Industrial Manipulator can lift weights up to 900kg.  Its articulated arm and balanced state gives the operator easier control for the moving and positioning of the load. Standard safety features in the manipulator include an air reservoir and one way safety valve.  These standard features can be enhanced depending on application. For extremely heavy loads where there is the possibility of total weight loss the hydraulic anti-jump device is available.  Other anti-drop or anti-release features are normally included in the toolings / end-effectors because they vary according to the product to be handled.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Pneumatic Industrial Manipulators Steel Rail System

Pneumatic Industrial Manipulators Steel Rail System

Posilift supply the Rail range which covers the most common uses in the manufacturing industry for repetitive lifting, moving and positioning applications.
The Rail system can be bought separately as parts or as a system or we can include Lift Assist Devices. Flexible Options.
POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Pneumatic Industrial Manipulators Aluminium Rail System

Pneumatic Industrial Manipulators Aluminium Rail System
The lightweight aluminum rail eases installation, and reduces overhead load requirements, while still providing up to 5,500 lbs [2,495 kg] load capacities. Our aluminum rail is the ideal solution whether your load is located directly under the system or cantilevered off to the side.
Posilift  offers eleven(11) different series of aluminum rial that is available in multiple shapes and configurations.The lightweight Aluminum rial eases installation and reduces overhead load requirements.The Aluminum Rail load capacity varies by size and lengths of hanger spans.
Enclosed Track Rail – extruded from high strength aluminum alloy hat allows for the trolley to travel inside the rail.
Curved Rail – split into two halves allowing for the trolley traveling inside it to transfer loads in the “X” and “Y”directions.
Tool Rail – is easily installed on C-Channel or angle iron structures.
Engineered Round Rail – ideal for low friction vertical or horizontal linear movements.
Engineered Linear Rail – ideal for floor mounted or wall mounted low friction horiziontal movements.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Pneumatic Industrial Manipulators Vacuum Lifters

Pneumatic Industrial Manipulators Vacuum Lifters
Posilift can supply a wide range of Vacuum Lifters.  Vacuum Lifters can be integrated into our manipulators and balancers or can be supplied as independent operating equipment that can be attached to hoists and cranes and capable of lifting up to 26 tonnes,
Posilift can supply the complete Anver Vaccuum System including Vacuum Generators, and Ergonomic Vacuum Lifters, to complete Vacuum Lifting Systems. Anver is the leading North American manufacturer of Vacuum Material Handling Equipment, Vacuum Lifters and Vacuum System Components. Anver designs and builds its equipment in Hudson, MA, USA and sells worldwide.
Vacuum Lifters can be used for a wide range of applications including sheet metal handling, glass walls handling,  cement slabs handling, stone handling, pipe handling, coil handling, food handling, granite plate handling and so on.  Vacuum Lifters can be attached to manipulators, balancers, hoists or cranes and can be supplied with a lift capacity of up to 26 tonnes.  Posilift Group is the Anver Vacuum lifter distributor in ASEAN countries.  Anver is the leading North American manufacturer of Vacuum Material Handling Equipment, Vacuum Lifters and Vacuum System Components.
All ANVER vacuum lifting device meets the U.S. ANSI ASME standards, OSHA and other international safety and quality standards.  Their features include security protection such as vacuum generators with a leak alarm device in the event that an air leak occurs or if there is insufficient air pressure; and bolted on suction cups to enable easy removal for maintenance or replacement.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Posilift is the distributor of Knight Global Pnuematic

Posilift is the distributor of Knight Global Pnuematic

Posilift is the distributor of Knight Global Pnuematic / Air Balancers made in the USA.  Knight Global Pneumatic/Air Balancers are designed to assist in transferring loads ergonomically using a variety of Up/ Down pendants or Balance “Float” Control Options.  

Knights have a wide range of Air Balancers and can lift weights up to 1,270 kg.  Air Balancers provide superior control over standard air hoists when it comes to locating and positioning loads. The operator can take their hand off the pendant controls, hold the load and “float” the load into position. The sensation is one of part weightlessness.    

Air Balancer speeds are greater when compared to a traditional hoist.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au


Posilift Australia Servo Hoists - (Knight Servo Hoist Systems)

Posilift Australia Servo Hoists - (Knight Servo Hoist Systems)
Knight Servo Hoist Systems are Intelligent Assist Devices (IAD) that provide controlled transfers of workloads. Intuitive, Programmable, Fast.  Servo Systems enable an operator to simply grasp the handle and move the load with instantaneous response. No button pushing required.  They have a lifting capacity of up to 900kg (200lbs). The Knight Servo Hoist Systems are user friendly, increase productivity, and provide improved ergonomics and safety for workers.  Standard or custom options are available to allow for various programmed product functions.
Servo Hoist Systems increase productivity by eliminating wasted motion, reducing reaction time, enhancing reliable precision and speed for any application.  As an extension of an operator’s natural movement, this technology greatly improves accuracy and repeatability of the application
Six Reasons to choose a Knight Servo System?
Intuitive
Servo systems are intuitive and require little to no worker training. The operator will experience Instantaneous Response, when the handle is grasped. Some Knight Servo handles can be equipped with a Photo-eye that senses the operator’s hand which enables or disables the servo system.
Powerful
Servos systems assist your natural movements, by combining safety and ergonomics; it makes heavy loads feel weightless.
Programmable
The user can control lifting speeds, combined with setting acceleration and deceleration rates. The system monitors the weight at all times and can quickly react to loaded and unloaded conditions. Virtual limits up and down to set work envelopes and slow down zones. Additional I/O comes standard to all systems to assist in interlocking with added motions for a safe condition. The Servo Tractors can be programmed to create a virtual path to return tools to a home position or a pre-set position.
Fast
Maximum Servo Hoist lifting speeds up to241 fpm (73.5mpm) and maximum Servo Tractor travel speeds up to 175 fpm(53mpm). By controlling your work envelopes and precise positioning you will increase cycle time.
Durable
Chain is more durable when balancing weights in excess of 250 lbs. [113kg] and/ or when high cycle rates are encountered. Cable has a greater tendency to fray or “birdcage”. Chain makes this system virtually maintenance free.
Productive
All of the Servo Hoist features here add up to increased productivity, improved ergonomics for workers, and a safer work environment.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Portable Pneumatic Industrial Manipulators Lifters

Portable Pneumatic Industrial Manipulators Lifters
Posilift can supply a range of portable Industrial  manipulators.  These are often needed when (i) the reach of the manipulator is not sufficient to reach all parts of the work area and (ii) it is not possible or not feasible to use overhead tracking to cover the extra distance.
The Famatec Gingo is a manipulator specifically designed for portability.  It is not limited by the availability of factory compressed air.  The Famatec Gingo generates its own venturi vacuum using a battery powered air compressor mounted on the ground trolley.  This allows off-site and outdoor use.  It is commonly used by builders and shop fitters for lifting large glass panels off a truck or for lifting and positioning glass windows for fitment on a shop front or building.
Manipulators can also be designed with ground wheel support trollies so they can be wheeled to different areas or work stations with or without a load.  All they require is clean dry air.
Manipulators can also be attached to a moveable base plate for easy re-location using a pallet lifter, forklift, or similar.
CALL US TO DISCUSS YOUR PARTICULAR REQUIREMENT
POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Cable Balancing Arm (Soft Arm) Pneumatic Industrial Manipulators

Cable Balancing Arm (Soft Arm) Pneumatic Industrial Manipulators
Cable Balancing Arm (Soft Arm) manipulators are ideal for rapid movement of light loads.   They are light and easy to use.  They can handle weights up to 100 kg and reaches up to 3 metres .  Cable Balancing Arm manipulators come in many different sizes, reaches and configurations and can be tailor made to suit your application, They can be fitted with a wide range of end effector toolings – pneumatic grippers, vacuum suction cups, magnets or hooks or they can be supplied with a flange or hook onto which the customer can fit their own tooling.
All Posilift supplied Cable Balancing Arm manipulators meet the highest international standards of quality, safety and reliability.  All have an Air Reservoir with sufficient air to allow the operator to safely park the manipulator or finish the work cycle in the event of air supply disruption; a Non Return Valve to prevent the Air Reservoir from emptying in case of air supply interruption; a Safety Valve to prevent fast movement of the arm in the event the operator gives the wrong command.  All come with “load” and “no load” balancing,
CALL OR EMAIL US FOR INFORMATION ABOUT OUR SOLUTIONS FOR YOUR INDUSTRY OR YOUR APPLICATION.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Rigid Articulating Arm (Hard-arm) Pneumatic Industrial Manipulators

Rigid Articulating Arm (Hard-arm) Pneumatic Industrial Manipulators
Rigid Articulating Arm Manipulators are ideal for the repetitive handling of heavy or off-centre loads; when rotating or inclining a load; when gripping or placing a load where there is an overhead obstruction; or where particular precision is needed when gripping, moving or positioning a load. They allow the operator full control over the load.  Posilift sell an extensive range of Rigid Articulating (Hard Arm) Manipulators from small, light and compact models for lower weights and confined spaces, to large manipulators to carry loads weighing up to 900kg and with extended reaches of 6 metres to give a working area of 12 metres.  The Industrial Manipulators can be configured to suit your application and work area. They can be supplied in many configurations – Column Floor Mounted; Overhead Fixed; Overhead Trolley Mounted; Portable Base Plate; Floor Trolley Mounted,
All manipulators can be fitted with specifically designed end-effectors tooling to handle limitless Industry applications. Or they can be supplied with a flange onto which you can attach your own end-effector tooling.
It is likely that Posilift or one of its suppliers has already solved your problem somewhere in the world.
CALL US FOR INFORMATION ABOUT THE ARTICULATED ARM MANIPULATOR MOST SUITABLE FOR YOUR TASK AND BUDGET.
POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Sunday, 27 August 2017

Pneumatic Industrial Manipulators

Pneumatic Industrial Manipulators
Posilift supply a wide range of Industrial Manipulators (Zero Gravity Lift Assist Devices) for the repetitive handling of loads from 10 kg to 900 kg. We supply Famatec Industrial Manipulators (Italy) and Armtec Industrial Manipulators ( Australia/China ).  All manipulators are custom designed to solve your handling problem and to suit your particular application and working environment.  All are designed to satisfy the requirements of International Corporations (ergonomic, safe, easy to use, reliable and durable) and all meet the International Standards of Health and Safety.
Manipulators work in infinite ways. Using articulating arms, specialised end effectors and tooling and zero gravity load balancing technology; loads can be moved weightlessly in any direction.  Ideal for the repetitive handling of loads.  Ideal for LIFTING – GRIPPING – ROTATING – INCLINING – PLACING – TIPPING – STACKING – POSITIONING – TRANSFERRING – HANDLING – EMPTYING – TILTING of loads.
The benefits of using industrial manipulators nclude:  INCREASED PRODUCTIVITY  – IMPROVED SAFETY STANDARS  – REDUCED PRODUCT DAMAGE- REDUCED LABOUR COSTS – MORE EFFICIENT OPERATION – REDUCED FATIGUE AND INJURIES – IMPROVED ERGONOMICS AND WORKING CONDITIONS
POSILIFT SUPPLIED MANIPULATORS ARE  EASY TO USE, HAVE LOW OPERATING COST AND MAINTENANCE, HAVE GUARANTEED SAFETY.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Other Lift Assist Devices

Pneumatic Industrial Manipulators Other Lift Assist Devices


Posilift can customise handling solutions to meet a customers need which might be outside our standard range.  In addition to pneumatic manipulators, air balancers, servo hoists and  vacuum lifter solutions we can also supply or custom make many other lift assist devices.  These include lifting tables, shuttle, conveyors, power rail and non-standard fixtures.

Posilift can supply a wide range of lift assist device to solve most handling problems.  We can design and supply any non-standard fixture to meet your particular requirement.    If your need is outside our normal range, we can tailor make the solution with a non-standard lift assist device and end effector tooling,

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au


Other Lift Assist Devices

Posilift can customise handling solutions to meet a customers need which might be outside our standard range.  In addition to pneumatic manipulators, air balancers, servo hoists and  vacuum liftersolutions we can also supply or custom make many other lift assist devices.  These include lifting tables ,shuttle,conveyors ,power rail and non-standard fixtures.
Posilift can supply a wide range of lift assist device to solve most handling problems.  We can design and supply any non-standard fixture to meet your particular requirement.    If your need is outside our normal range, we can tailor make the solution with a non-standard lift assist device and end effector tooling,

Vacuum Lifters Pneumatic Industrial Manipulators

Vacuum Lifters Pneumatic Industrial Manipulators
Posilift can supply a wide range of Vacuum Lifters.  Vacuum Lifters can be integrated into our manipulators and balancers or can be supplied as independent operating equipment that can be attached to hoists and cranes and capable of lifting up to 26 tonnes,
Posilift can supply the complete Anver Vaccuum System including Vacuum Generators, and Ergonomic Vacuum Lifters, to complete Vacuum Lifting Systems. Anver is the leading North American manufacturer of Vacuum Material Handling Equipment, Vacuum Lifters and Vacuum System Components. Anver designs and builds its equipment in Hudson, MA, USA and sells worldwide.
Vacuum Lifters can be used for a wide range of applications including sheet metal handling, glass walls handling,  cement slabs handling, stone handling, pipe handling, coil handling, food handling, granite plate handling and so on.  Vacuum Lifters can be attached to manipulators, balancers, hoists or cranes and can be supplied with a lift capacity of up to 26 tonnes.  Posilift Group is the Anver Vacuum lifter distributor in ASEAN countries.  Anver is the leading North American manufacturer of Vacuum Material Handling Equipment, Vacuum Lifters and Vacuum System Components.
All ANVER vacuum lifting device meets the U.S. ANSI ASME standards, OSHA and other international safety and quality standards.  Their features include security protection such as vacuum generators with a leak alarm device in the event that an air leak occurs or if there is insufficient air pressure; and bolted on suction cups to enable easy removal for maintenance or replacement.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Pneumatic Industrial Manipulators

Our combined range of lift assist devices from Armtec, Knights and Famatec gives us a virtually unlimited ability to solve repetitive handling problems across most industries. We have have solutions for the Paint Industry, General Engineering Industry, Energy, Casting, Rubber, Military…..the list goes on.  We have the solutions for lifting heavy or awkward loads, we have solutions for clean environments, we have solutions for explosive environments. Call us for a solution to your handling problem.

Lift, Move, Rotate, Incline, Position:  Our equipment is designed to suit your application.
Many Gripping Styles:   Pneumatic or Mechanical Grippers, Vacuum Suction, Magnets, Forks, Hooks.
Many Confirgurations: Column, Overhead Fixed, Overhead Trolley Mounted; Floor Trolley Mounted.
Posilift’s skill is to solve your handling problem and to supply the solution that best meets your need and budget.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Automotive Assembly Industrial Manipulators

Automotive Assembly Industrial Manipulators
Posilift have supplied and installed many lift assist devices  – industrial manipulators, balancers and servo hoists –  for automotive assembly lines, stamping lines, welding lines and coating lines.
We have sold and installed manipulators for all the car assembly stations including doosr off and doors on stations, dashboards, front end installation, installation of car batteries, front and rear seats, tires, sunroof, engines, windshields as well as the undercar components.
Lift, Move, Rotate, Incline, Position:  Posilift offers a wide variety of Industrial Manipulators for the easy and safe repetitive handling of products used in the automotive industry.
Many Gripping Styles: Pneumatic or Mechanical Grippers, Vacuum Suction Cups,
Many Configurations: Column Mounted, Overhead Fixed, Overhead Trolley Mounted or Floor Trolley Mounted.
Our equipment is specifically designed to suit your operation.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au

Auto Parts Industry Industrial Manipulators

Auto Parts Industry Industrial Manipulators

Posilift has extensive experience in the supply of lift assist devices to the Auto Parts manufacturing industry.   Our Lift Assist Devices – Industrial Manipulators, Balancers and Servo Hoists have been used for the handling of such auto parts as dashboards, sunroofs, tires, doors, side panels, front wall, car seats, transmissions, clutches, chassis, axles, engines, engine block, cylinder seat cover and exhaust systems.
Lift, Move, Rotate, Incline, Position:  Posilift offers a wide variety of Lift Assist Devices for the easy and safe repetitive handling of products in the Auto Parts Industry.
Many Gripping Styles: Pneumatic or Mechanical Grippers, Vacuum Suction Cups, Magnets, Forks, Hooks,
Many Configurations: Column Mounted, Overhead Fixed, Overhead Trolley Mounted or Floor Trolley Mounted.
Our equipment is specifically designed to suit your operation.

POSILIFT AUSTRALIA
Posilift Australia Pty Ltd / Dalmec Pty Ltd
Address: Suite 1A, Level 2, 802 Pacific Highway, Gordon NSW 2072 Australia
Phone: +61 2 9415 1914 | Fax:+61 2 9415 1478
Email: sales@posilift.com.au  | Website: www.posilift.com.au