Tuesday, 3 October 2017

SAFETY SOLUTIONS FOR UNSTABLE LOADS FOUNDRY HEAVY LIFTING AND POSITIONING 550KG SAND CAST MOULDS

AFETY SOLUTIONS FOR UNSTABLE LOADS
FOUNDRY HEAVY LIFTING AND POSITIONING
550KG SAND CAST MOULDS

PROBLEM:  Sand cast moulds weighing up to 550kg had to be moved and precisely positioned.  The sand casts were fragile and prone to disintegrate when knocked.  They needed care and control in lifting and positioning.  The company had its own tooling to grip the moulds and only needed a lifter with a hook.

ANALYSIS:  This application required an articulated arm in a balanced state to give the precise control for positioning of the fragile sand moulds.  It also needed additional safety features in case of total load loss during operation. 
A crane or hoist was not considered suitable because their jerky up and down movements increased the risk of damage to the mould particularly on positioning. 
An air balancer was not suitable for this operation because there was no anti-jumping option strong enough to counter the possible heavy weight loss. 

SOLUTION:  For this operation a Posilift Australia MaxiPartner Manipulator was chosen with the added safety feature of a hydraulic anti-jump device.  The manipulator was mounted on overhead tracking with a pneumatic motorized trolley.  The hook and handle were designed to give the operator the best control of the product using both hands.  All the controls were positioned ergonomically on the handles so they can be used by the operator without having to take his hands off the handles.

The Posilift Australia MaxiPartner can lift weights up to 900kg.  Its articulated arm and balanced state gives the operator easier control for the moving and positioning of the load. Standard safety features in the manipulator include an air reservoir and one way safety valve.  These standard features can be enhanced depending on application. For extremely heavy loads where there is the possibility of total weight loss the hydraulic anti-jump device is available.  Posilift Australia Australia always include the safety anti-drop or anti-release required for an operation. These are normally included in the toolings / end-effectors because they can vary according to the product, the handling task and the work environment.
(Name of Reference Company supplied on request)

Posilift Australia Australia’s skill is to solve repetitive handling problems in the workplaceAsk us about our solution to your repetitive handling problem.  It is likely we have solved it in Australia or elsewhere around the world.

Posilift Australia Pty Ltd   phone 02 9415 1914

No comments:

Post a Comment